The System is ideal for slabs forming. It consists of three main components :

The system can be used for different slab thickness with various geometries. The 18 mm plywood plates are supported by Aluminum Girders.

The S-150 and T-150 Aluminum Girders can be used as a secondary and primary girders respectively Although, it is possible to use only one type of these Girders as a secondary and primary at the same time, i.e. same parts can be used in both directions.

The ability of overlapping Aluminum Girders results in flexibility nature of the system to adapt for various different room sizes. Overlapping in any direction is possible in either direction. The Fork Head at the joint of the main Girders prevents the Aluminum Girders from tilting.

The system can be dismantled easily by lowering the steel prop, tilting and pulling out the aluminum beams. Ecoform is a system with few numbers of different components, flexible to adjust to every layout with optimum use of material. The low weight of the components is an extra advantage of the system.

System Components