The tubes and fittings of scaffoldings consist of a comprehensive range of components which are strong, safe and economical, and are ideally suited for wide application of construction and maintained industry. All scaffolding fittings are designed to accommodate 48.3 O.D. scaffolding tube, unless otherwise stated. They are supplied in painted or galvanized finish. |
|
Scaffolding Tube: |
|
Steel Scaffold tube, black or painted, 48.3 O.D., mild steel, confirms to BS 1139. These are available in 6.0 m lengths, or required cut lengths. |
|
Swivel Coupler:
|
|
For any angle joint (48.3x48.3 mm / 48.3x60.3 mm).
|
|
Double Coupler: |
|
For right angle joint (48.3x48.3 mm / 48.3x60.3 mm).
|
|
Putlog Coupler (Drop Forged):
|
|
To connect Putlog/Transom to standard scaffold tube (48.3x48.3 mm).
|
|
Joint Pin: |
|
For quick internal end-to-end connection of scaffold tube, 48.3 mm O.D. Not suitable for joints where tension can be developed in the tube. |
|
Sleeve Coupler: |
|
For external end-end connection of scaffold tubes, 48.3 mm O.D, they can be employed where tension joints are required.
|
|
Fixed Final: |
|
Connect a scaffolding tube at right angles directly to the end of another tube with no projection. Ideal for guardrails, crowd control barriers etc.
|
|
DH Putlog Coupler: |
|
Used to secure putlog and transom to horizontals.
|
|
Band and Plate Coupler: |
|
a 120 mm x 120 mm steel plate providing a full bearing surface for load distribution from verticals.
|
|
Base jack: |
|
38 mm galvanized tubular jack. It may be used in either the bottom or inverted in the top of open-ended verticals.
|
|
Rocking Base Plate:
|
|
Providing a firm base on ground sloping up tom 60 degree to the horizontal. |
|
Forkhead: |
|
Are available to accept various sizes of timber girders. The forkheads fit over universal jacks at the top a vertical for height adjustment.
|
|
Rocking Forkhead: |
|
Ideal for bridges having decks which slope in over or two directions. This unique forkhead allows adjustment suit sloped concrete elements.
|
|
Scaffold steel board: |
|
Manufactured from folded steel metals, with hook at the ends to prevent movement and ensure complete rigidity of the working platform.
|
|
Castor wheels: |
|
castor wheel, rubber tyre with wheel lock and standard lock.
|
|
SYSTEM COMPONENTS
